Replacing The Air Baffle In A 9008-22L, 9009-22A, Or 9223-22H System - IBM Power Systems 9008-22L Manual

Figure 32. Removing the air baffle

Replacing the air baffle in a 9008-22L, 9009-22A, or 9223-22H system

Use this procedure to replace the air baffle in a IBM Power System L922 (9008-22L), IBM Power System
S922 (9009-22A), or IBM Power System H922 (9223-22H) server.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Replace each air baffle (A) straight down into the chassis. See Figure 33 on page 45. When an air
baffle is upside-down, hold the detachable drive cover to prevent it from coming loose.
44
Power Systems: System processor modules for the 9008-22L, 9009-22A, or 9223-22H