IBM System x3750 M4 Installation And Service Manual page 725

806f070d-041fffff Rebuild in progress for Array in system [ComputerSystemElementName].
Explanation: IMM has detected that an Array Rebuild is in Progress.
May also be shown as 806f070d041fffff or 0x806f070d041fffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0178
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
806f0807-0301ffff [ProcessorElementName] has been Disabled.
Explanation: IMM has detected that Processor 1 has been disabled.
May also be shown as 806f08070301ffff or 0x806f08070301ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f0807-0302ffff [ProcessorElementName] has been Disabled.
Explanation: IMM has detected that Processor 2 has been disabled.
May also be shown as 806f08070302ffff or 0x806f08070302ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f070d-041fffff • 806f0807-0302ffff
Appendix D. Integrated management module II (IMM2) error messages
707