Replacing The Microprocessor Air Baffle - IBM System x3750 M4 Installation And Service Manual

Types 8722 and 8733

Hide thumbs Also See for System x3750 M4:

Table of Contents

Replacing the microprocessor air baffle

This information provides instructions on how to replace the microprocessor air

About this task

To install the microprocessor air baffle, complete the following steps:

1. Read the safety information and installation guidelines, see "Safety" on page vii

2. Align the tabs on the air baffle behind the latches (front and rear latches) of the

System x3750 M4 Types 8722 and 8733: Installation and Service Guide

and "Installation guidelines" on page 35.

two DIMMs closest to the microprocessor (the DIMM on the left of the

microprocessor and the DIMM on the right of the microprocessor); then, lower

the air baffle down until it is seated firmly.

DIMM air baffle