Replacing The Fan Cage Assembly - IBM System x3750 M4 Installation And Service Manual

Types 8722 and 8733

Hide thumbs Also See for System x3750 M4:

Table of Contents

Replacing the fan cage assembly

This information provides instructions on how to replace the fan cage assembly.

About this task

To replace the fan cage assembly, complete the following steps:

1. Align the tabs on the fan cage assembly with the slots on both sides of the

chassis and lower it into the server.

2. Rotate the fan cage assembly release latches down until the release latches are

in the locked position.

3. Reinstall the cover (see "Replacing the server top cover" on page 227).

4. Slide the server into the rack.

5. Reconnect the power cord and any cables that you removed.

6. Turn on the peripheral devices and the server.

Chapter 6. Removing and replacing components