IBM System x3750 M4 Installation And Service Manual page 802

816f011b-0701ffff • 816f0207-0301ffff
816f011b-0701ffff The connector [PhysicalConnectorElementName] configuration error has been repaired.
Explanation: IMM has detected an Interconnect Configuration error has been repaired.
May also be shown as 816f011b0701ffff or 0x816f011b0701ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0267
SNMP Trap ID: 50
Automatically notify Support: No
User response: Information only; no action is required.
816f0125-0c01ffff [ManagedElementName] detected as present.
Explanation: IMM has detected the operator information panel is present.
May also be shown as 816f01250c01ffff or 0x816f01250c01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0390
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
816f0207-0301ffff [ProcessorElementName] has Recovered from FRB1/BIST condition.
Explanation: IMM has detected that Processor 1 has recovered from a FRB1/BIST condition.
May also be shown as 816f02070301ffff or 0x816f02070301ffff
Severity: Info
Alert Category: Critical - CPU
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0045
SNMP Trap ID: 40
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
784
System x3750 M4 Types 8722 and 8733: Installation and Service Guide