Chapter 6. Removing and replacing components
This information provides an introduction to removing and replacing components
in the server.
Replaceable components are of three types:
v Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
v Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself
v Field replaceable unit (FRU): FRUs must be installed only by Trained service
See Chapter 5, "Parts listing, System x3750 M4 Types 8722 and 8733," on page 215
to determine whether a component is a Tier 1 CRU, Tier 2 CRU, or FRU that must
be replaced only by a trained service technician.
For information about the terms of the warranty, see the Warranty Information
document that comes with the server.
For more information about getting service and assistance, see Appendix E,
"Getting help and technical assistance," on page 841.
Returning a device or component
This information provides instructions for returning a device or component.
If you are instructed to return a device or component, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Removing and replacing server components
This information covers removing and replacing server components.
This section provides information for removing and replacing components in the
server.
© Copyright IBM Corp. 2013
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
technicians.
225