IBM System x3750 M4 Installation And Service Manual page 182

4. Check for and apply code updates. Fixes or workarounds for many problems
5. Check for and correct an incorrect configuration. If the server is incorrectly
164
System x3750 M4 Types 8722 and 8733: Installation and Service Guide
when you contact IBM or an approved warranty service provider. For
instructions for running DSA, see the Dynamic System Analysis Installation and
User's Guide.
To download the latest version of DSA code and the Dynamic System Analysis
Installation and User's Guide, go to http://www.ibm.com/support/entry/portal/
docdisplay?lndocid=SERV-DSA.
might be available in updated UEFI firmware, device firmware, or device
drivers. To display a list of available updates for the server, go to
http://www.ibm.com/support/fixcentral.
Attention: Installing the wrong firmware or device-driver update might cause
the server to malfunction. Before you install a firmware or device-driver
update, read any readme and change history files that are provided with the
downloaded update. These files contain important information about the
update and the procedure for installing the update, including any special
procedure for updating from an early firmware or device-driver version to the
latest version.
Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest
level of code is supported for the cluster solution before you update the code.
a. Install UpdateXpress system updates. You can install code updates that are
packaged as an UpdateXpress System Pack or UpdateXpress CD image. An
UpdateXpress System Pack contains an integration-tested bundle of online
firmware and device-driver updates for your server. In addition, you can
use IBM ToolsCenter Bootable Media Creator to create bootable media that
is suitable for applying firmware updates and running preboot diagnostics.
For more information about UpdateXpress System Packs, see
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=SERV-
XPRESS and "Updating the firmware" on page 137. For more information
about the Bootable Media Creator, see http://www.ibm.com/support/
entry/portal/docdisplay?lndocid=TOOL-BOMC.
Be sure to separately install any listed critical updates that have release
dates that are later than the release date of the UpdateXpress System Pack
or UpdateXpress image (see step 4b).
b. Install manual system updates.
1) Determine the existing code levels.
In DSA, click Firmware/VPD to view system firmware levels, or click
Software to view operating-system levels.
2) Download and install updates of code that is not at the latest level.
To display a list of available updates for the server, go to
http://www.ibm.com/support/fixcentral.
When you click an update, an information page is displayed, including
a list of the problems that the update fixes. Review this list for your
specific problem; however, even if your problem is not listed, installing
the update might solve the problem.
configured, a system function can fail to work when you enable it; if you make
an incorrect change to the server configuration, a system function that has been
enabled can stop working.
a. Make sure that all installed hardware and software are supported. See
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us