IBM System x3750 M4 Installation And Service Manual page 271

Types 8722 and 8733

Hide thumbs Also See for System x3750 M4:

Table of Contents

2. Touch the static-protective package that contains the new ServeRAID M5110

SAS/SATA adapter to any unpainted surface on the outside of the server;

then, grasp the adapter by the top edge or upper corners of the adapter and

remove it from the package.

3. Align the ServeRAID M5110 SAS/SATA adapter so that the keys align

correctly with the connector on the riser-card assembly.

4. Insert the SAS/SATA adapter into the connector on the riser-card until it is

firmly seated.

Attention: Incomplete insertion might cause damage to the server or the

5. Reinstall the cable to the RAID cache cards, if it was removed (see "Replacing

a RAID cache card" on page 277).

6. Reinstall the riser-card assembly into the system board.

7. Reconnect cables to the adapter.

8. Replace the cover (see "Replacing the server top cover" on page 227).

9. Slide the server in the rack.

10. Reconnect the power cord and any cables that you removed.

Chapter 6. Removing and replacing components

Troubleshooting