Replacing The Bezel - IBM System x3750 M4 Installation And Service Manual

Types 8722 and 8733

Hide thumbs Also See for System x3750 M4:

Table of Contents

5. Pull the top of the bezel out slightly; then, rotate it downward until the tabs on

the bottom of the bezel disengages from the chassis and set it aside.

Replacing the bezel

This information provides instructions on how to replace the bezel.

About this task

To install the bezel, complete the following steps:

1. Insert the tabs on the bottom of the bezel into the holes on the chassis.

2. Rotate the bezel upward to the server and reinstall the bezel screws.

3. Install the cover (see "Replacing the server top cover" on page 227).

4. Reconnect the power cords and any cables that you removed.

5. Slide the server into the rack.

6. Turn on the peripheral devices and the server.

Chapter 6. Removing and replacing components