Obtaining The Ip Address For The Imm; Logging On To The Imm Web Interface - IBM System x3750 M4 Installation And Service Manual

Obtaining the IP address for the IMM

This information provides instructions on how to obtain the IMM IP address.
About this task
To access the web interface to use the remote presence feature, you need the IP
address or host name of the IMM. You can obtain the IMM IP address through the
Setup utility and you can obtain the IMM host name from the IMM network access
tag. The server comes with a default IP address for the IMM of 192.168.70.125. To
obtain the IP address, complete the following steps:
Procedure
1. Turn on the server.
Note: Approximately 10 seconds after the server is connected to ac power, the
power-on button becomes active.
2. When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed
on the screen for only a few seconds. You must press F1 quickly.) If you have
set both a power-on password and an administrator password, you must type
the administrator password to access the full Setup utility menu.
3. From the Setup utility main menu, select System Settings.
4. On the next screen, select Integrated Management Module.
5. On the next screen, select Network Configuration.
6. Find the IP address and write it down.
7. Exit from the Setup utility.

Logging on to the IMM web interface

This information provides instructions on how to log on to the IMM web interface.
About this task
To log on to the IMM web interface, complete the following steps:
Procedure
1. On a system that is connected to the server, open a web browser. In the
Address or URL field, type the IP address or host name of the IMM to which
you want to connect.
Note: If you are logging on to the IMM for the first time after installation, the
IMM defaults to DHCP. If a DHCP host is not available, the IMM assigns a
static IP address of 192.168.70.125. The IMM network access tag provides the
default host name of the IMM and does not require you to start the server.
2. On the Login page, type the user name and password. If you are using the
IMM for the first time, you can obtain the user name and password from your
system administrator. All login attempts are documented in the system-event
log.
Note: The IMM is set initially with a user name of USERID and password of
PASSW0RD (with a zero in the word password, not the letter O). You have
read/write access. You must change the default password the first time you log
on.
3. Click Log in to start the session. The System Status and Health page provides a
quick view of the system status.
Chapter 3. Configuration information and instructions
153