Removing The Dimm Air Baffle - IBM System x3750 M4 Installation And Service Manual

Types 8722 and 8733

Hide thumbs Also See for System x3750 M4:

Table of Contents

Removing the DIMM air baffle

This information provides instructions on how to remove the DIMM air baffle.

About this task

To remove the DIMM air baffle, complete the following steps:

1. Read the safety information and installation guidelines, see "Safety" on page vii

2. Turn off the server (see "Turning off the server" on page 22) and all attached

3. Remove the top cover (see "Removing the server top cover" on page 226).

4. Lift the DIMM air baffle from the server.

System x3750 M4 Types 8722 and 8733: Installation and Service Guide

and "Installation guidelines" on page 35.

peripheral devices. Disconnect all power cords; then, disconnect all external

cables as necessary to replace the device.

Attention: For proper cooling and airflow, replace the air baffle before you

turn on the server. Operating the server with an air baffle removed might

damage server components.

DIMM air baffle