IBM System x3750 M4 Installation And Service Manual page 853

816f070d-041fffff Rebuild completed for Array in system [ComputerSystemElementName].
Explanation: IMM has detected that an Array Rebuild has Completed.
May also be shown as 816f070d041fffff or 0x816f070d041fffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0179
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
816f0807-0301ffff [ProcessorElementName] has been Enabled.
Explanation: IMM has detected Processor 1 has been Enabled.
May also be shown as 816f08070301ffff or 0x816f08070301ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0060
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f0807-0302ffff [ProcessorElementName] has been Enabled.
Explanation: IMM has detected Processor 2 has been Enabled.
May also be shown as 816f08070302ffff or 0x816f08070302ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0060
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f070d-041fffff • 816f0807-0302ffff
Appendix D. Integrated management module II (IMM2) error messages
835