IBM System x3750 M4 Installation And Service Manual page 801

816f010d-041effff • 816f010f-2201ffff
816f010d-041effff The [NumericSensorElementName] has been enabled.
Explanation: The previously disabled drive 30 has been enabled.
May also be shown as 816f010d041effff or 0x816f010d041effff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f010d-041fffff The [NumericSensorElementName] has been enabled.
Explanation: The previously disabled drive 31 has been enabled.
May also be shown as 816f010d041fffff or 0x816f010d041fffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: Information only; no action is required.
816f010f-2201ffff The System [ComputerSystemElementName] has recovered from a firmware hang.
Explanation: IMM has recovered from a System Firmware Hang.
May also be shown as 816f010f2201ffff or 0x816f010f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0187
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
783
Appendix D. Integrated management module II (IMM2) error messages