Toshiba e-STUDIO556 Service Manual page 1036

Sub
05/08 Mode Element
element
08 Setting System User
Mode interface
08 Setting System User Service notification
Mode interface information
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System Network
Mode
08 Setting System User
Mode interface
08 Setting System FAX
Mode
Item Subitem Code
8713
8715
8717
8718
8719
8720
8721
Sub- Default Acceptable
Details
code value value
Setting of web 0 0-1
upload/web printing
Password for zip file #10481
with password 09
Shutdown operation 0 0-1
when Super Sleep is
enabled
Selection for caching 0 0-17
the screen of control
panel at start-up
MTU setting of 1500 576-1500
network
communication
Department code 0 0-1
display with asterisk
Automatic FAX 0 0-1
sending at AutoClear
when scanning
original put on the
glass
75
RAM Contents
SYS Sets whether the web upload and web printing function
is enabled or disabled.
- Web upload is a function which uploads the image
data created on the equipment to the web page
displayed on EWB.
- Web printing is a function which prints the web page
displayed on EWB or the PDF file included in the web
page displayed on EWB.
0: Disabled
1: Enabled
- SYS Password for zip file with password of service
notification information.
Minimum number of digits: 0, maximum number of
digits: 20
Available character: alphanumeric characters and
symbols
SYS Sets the operation when the power button on the control
panel is press for a few seconds if Super Sleep is
enabled.
0: Hibernation
1: Super Sleep
SYS Use this code to shorten the time to switch the function
on the control panel for the first time immediately after
start-up. However, the start-up time becomes longer
(about 1 to 3 seconds per screen). When selecting
multiple screens, enter the total value.
0: Disabled
1: Copy
16: Fax
NIC Normally there's no need to change the MTU value. Set
the proper MTU value when MFP is connected to the
Internet using broadband router and so on.
SYS 0: Displays department code with asterisk when
inputting it.
1: Displays department code as it is when inputting it.
SYS Sets whether the job is sent or canceled when
AutoClear is executed on the interruption screen to
confirm the next original displayed after scanning the
original put on the glass. Use this code to cancel job
when the equipment is left unattended while the
interruption screen is displayed.
0: Sends job
1: Cancels job
Proce Servic
dure e UI
1
11
1 Yes
1
12
1 Yes
1 Yes