Upper Limit / Lower Limit Comparison Function - Panasonic GM1 Series Reference Manual

Motion controller
Hide thumbs Also See for GM1 Series:
Table of Contents

Advertisement

5.5 Upper Limit / Lower Limit Comparison Function

Overview of the function
● This function compares acquired analog input data with the preset upper limit and lower limit.
When the acquired data exceeds the upper limit (digital conversion value is larger
than the upper limit comparison ON level)
Turns ON the "Ch* upper limit comparison status".
When the acquired data exceeds the lower limit (digital conversion value is smaller
than the lower limit comparison ON level)
Turns ON the "Ch* lower limit comparison status".
● When Analog_8IN parameters>Upper and lower limit comparison is set to "Execute",
turn ON "Ch* upper limit/lower limit comparison request" to execute the function.
● The upper limit / lower limit comparison processing is executed on a channel-by-channel
basis.
Upper limit / lower limit comparison processing
Upper limit comparison
Upper limit comparison
Lower limit comparison
Lower limit comparison
Ch* upper limit / lower limit
comparison request
Ch* upper limit comparison
Ch* lower limit comparison
Ch* upper limit / lower limit
comparison status
(1)
Turn ON "Ch* upper limit / lower limit comparison request" to execute the function.
(2)
When a value that is equal to or larger than the upper limit comparison ON level is detected, "Ch*
upper limit comparison status" will turn ON.
(3)
When a value that is equal to or smaller than the upper limit comparison OFF level is detected, "Ch*
upper limit comparison status" will turn OFF.
(4)
When a value that is equal to or smaller than the lower limit comparison ON level is detected, "Ch*
lower limit comparison status" will turn ON.
(5)
The following I/O will be forcibly turned OFF if "Ch* upper limit / lower limit comparison request" is
turned OFF.
"Ch* upper limit comparison status"
"Ch* lower limit comparison status"
WUME-GM1AIO-01

5.5 Upper Limit / Lower Limit Comparison Function

(2)
ON level
Digital converted
OFF level
OFF level
ON level
(1)
status
status
(3)
value
(4)
(t)
(5)
5-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Agm1ad8Agm1da4

Table of Contents