Set The Server Module To A Ready-To-Remove State - Oracle SPARC T5-1B Service Manual

Set the Server Module to a Ready-to-Remove State

Perform this task before you remove the server module from the modular system.
1. Log into Oracle ILOM.
See "Log Into Oracle ILOM (Service)" on page
2. Ensure that the host is powered off.
Perform one of these commands according to the way that you logged into Oracle ILOM:
From the CMM, type.
■
-> show /Servers/Blades/Blade_n/System power_state
/Servers/Blades/Blade_5/System
Properties:
power_state = Off
From the server module, type.
■
-> show /System power_state
/System
properties:
power_state = Off
If the host is not powered off, power the host off.
3.
From the CMM, type.
■
-> stop /Servers/Blades/Blade_n/System
From the server module, type.
■
-> stop /System
4. Prepare the server module for removal.
Perform one of these commands according to the way that you logged into Oracle ILOM:
From the CMM, type.
■
-> set /Servers/Blades/Blade_n/SYS prepare_to_remove_action=true
Set the Server Module to a Ready-to-Remove State
21.
Preparing for Service 47