Remove the Bottom Rear Shipping Brace
Remove the Bottom Rear Shipping Brace
Remove the bottom shipping brace after the server rack reaches its final destination.
1.
Remove the four screws that secure the bottom shipping brace to the rack.
Slide the shipping brace out from the rear of the rack.
2.
Related Information
"Determine Correct Shipping Brace Fasteners" on page 47
■
"Install the Top Rear Shipping Braces" on page 47
■
"Install the Bottom Rear Shipping Brace" on page 49
■
50
SPARC T8-4 Server Installation Guide • September 2017