Group-Based Snmp Access; Licensing Requirements For Snmp; Guidelines And Limitations For Snmp - Cisco Nexus 5600 Series Configuration Manual

Configuring SNMP
• The password specified in the username command becomes the auth and priv passphrases for the
• If you create or delete a user using either SNMP or the CLI, the user is created or deleted for both SNMP
• User-role mapping changes are synchronized in SNMP and the CLI.
• Role changes (deletions or modifications from the CLI) are synchronized to SNMP.
When you configure passphrase/password in localized key/encrypted format, Cisco NX-OS does not
Note
synchronize the user information (passwords, rules, etc.).

Group-Based SNMP Access

Because a group is a standard SNMP term used industry-wide, roles are referred to as groups in this SNMP
Note
section.
SNMP access rights are organized by groups. Each group in SNMP is similar to a role through the CLI. Each
group is defined with three accesses: read access, write access, and notification access. Each access can be
enabled or disabled within each group.
You can begin communicating with the agent once your username is created, your roles are set up by your
administrator, and you are added to the roles.

Licensing Requirements for SNMP

This feature does not require a license. Any feature not included in a license package is bundled with the Cisco
NX-OS system images and is provided at no extra charge to you. For a complete explanation of the Cisco
NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.

Guidelines and Limitations for SNMP

Cisco NX-OS supports read-only access to Ethernet MIBs.
For more information about supported MIBs, see the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Cisco NX-OS does not support the SNMPv3 noAuthNoPriv security level.
OL-31641-01
SNMP user.
and the CLI.
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Licensing Requirements for SNMP
153