Parameter Data - YASKAWA VIPA System SLIO Manual

Analog Output
032-1BD40 - AO 4x12Bit 0(4)...20mA > Parameter data
Order no.
Operating temperature
Storage temperature
Certifications
UL certification
KC certification

4.8.2 Parameter data

Name Bytes
RES0 1
WIBRK_EN 1
CH0FN 1
CH1FN 1
CH2FN 1
CH3FN 1
WIBRK_EN Wire-break
recognition
CHxFN Function number
channel x
378
DS - Record set for access via CPU, PROFIBUS and PROFINET
IX - Index for access via CANopen
SX - Subindex for access via EtherCAT with Index 3100h + EtherCAT-Slot
More can be found in the according manual of your bus coupler.
Function
reserved
Wire-break recognition
Function number channel 0
Function number channel 1
Function number channel 2
Function number channel 3
Byte Bit 7 ... 0
0 n Bit 0: Wire-break recognition channel 0 (1: on)
n Bit 1: Wire-break recognition channel 1 (1: on)
n Bit 2: Wire-break recognition channel 2 (1: on)
n Bit 3: Wire-break recognition channel 3 (1: on)
n Bit 7 ... 4: reserved
In the following there are the measuring ranges with corresponding function number
listed, which were supported by the analog module. With FFh the corresponding channel
is deactivated. The formulas listed here allow you to transform an evaluated measuring
value (digital value) to a value assigned to the measuring range (analog value) and vice
versa.
032-1BD40
0 °C to 60 °C
-25 °C to 70 °C
yes
yes
Default DS
00h 00h
00h 00h
31h 80h
31h 81h
31h 82h
31h 83h
VIPA System SLIO
IX SX
3100h 01h
3101h 02h
3102h 03h
3103h 04h
3104h 05h
3105h 06h
HB300 | SM-AIO | | en | 17-05