YASKAWA VIPA System SLIO Manual page 320

Analog Input
031-1PA00 - AI1x 3Ph 230/400V 1A > Process data communication
Telegram types
Data set ID - DS-ID
Length of the user data
Common status
320
Status Designation
0x05 Error: Frame not defined
0x06 Error: Measurand not available
Ä Chapter 3.27.6 'Measurands' on page 316
0x07 Error: 'CMD Frame' - Command could not be executed
0x08 Error: 'Set Frame' - Frame definition is not valid (Set Frame)
0x09 Error: Telegram type not available - invalid request
0x0A Error: Parameter - the last parameter set was not valid
0x0E External error - Please contact our support
0x0F Internal error - Please contact our support
On an internal error (0x0F) all the measurements are stopped and a
Reset of the module to default parameters is triggered! Here all
counter values and Frame definitions are deleted!
By specifying the Telegram type the content of the responded data is defined. The fol-
lowing telegram types are available:
Type Designation
0x00 'Zero Frame' : Accessing Frame 0
0x01 'Read Value' : Read the measured value of a measurand
0x02 'Read Frame' : Read a previously defined data package
(Frame)
0x03 'Set Frame' : Define the data areas of a data package (Frame)
0x04 'CMD Frame' : Send a command
The measured values of one measurement are accessible in the module via one DS-ID.
Ä 'DS-ID' on page 309
Length of user data are specified from D00 ... D11: On error no user data are transferred
i.e. the length of the user data is 0 and the module returns an error ID.
Range of values: 0 ... 12
With this byte you get an overview of possible error messages. With
ment' on page 318 you get detailed information about an error.
n Bit 0: Frequency F_MAX exceeded
n Bit 1: Frequency F_MIN undershot
Bit 2: Temperature T_MAX exceeded
n
n Bit 3: Voltage VRMS_MAX exceeded
n Bit 4: Voltage VRMS_MIN undershot
n Bit 5: Efficiency PF_MIN undershot
n Bit 6: Current IRMS_MAX exceeded
n Bit 7: reserved
VIPA System SLIO
Page
Ä 321
Ä 321
Ä 325
Ä 323
Ä 327
Ä 'Status measure-
HB300 | SM-AIO | | en | 17-05