Technical Data - YASKAWA VIPA System SLIO Manual

VIPA System SLIO
In-/Output area
Input area
Output area
3.26.1

Technical data

Order no.
Type
Module ID
Current consumption/power loss
Current consumption from backplane bus
Power loss
Technical data analog inputs
Number of inputs
Cable length, shielded
Rated load voltage
Current consumption from load voltage L+ (without load)
Voltage inputs
Min. input resistance (voltage range)
Input voltage ranges
Operational limit of voltage ranges
Operational limit of voltage ranges with SFU
Basic error limit voltage ranges
Basic error limit voltage ranges with SFU
Destruction limit voltage
Current inputs
Max. input resistance (current range)
HB300 | SM-AIO | | en | 17-05
At CPU, PROFIBUS and PROFINET the input respectively output area is embedded to
the corresponding address area.
IX - Index for access via CANopen with s = Subindex, depends on number and type of
analog modules
SX - Subindex for access via EtherCAT with Index 6000h + EtherCAT-Slot
More can be found in the according manual of your bus coupler.
Addr. Name Bytes
+0 AI 0 2
+2 AI 1 2
+4 AI 2 2
+6 AI 3 2
No byte of the output area is used by the module.
031-1LD80 - AI 4x16Bit R/RTD > Technical data
Function
Analog value channel 0
Analog value channel 1
Analog value channel 2
Analog value channel 3
031-1LD80
SM 031
0410 1544
55 mA
1 W
4
200 m
DC 24 V
30 mA
-
-
-
-
-
-
-
-
-
-
Analog Input
IX SX
6401h/s 01h
6401h/s+1 02h
6401h/s+2 03h
6401h/s+3 04h
291