YASKAWA VIPA System SLIO Manual page 333

VIPA System SLIO
Parameter
Parameter
MODE
MEAS_DATA
CHANNEL_ IN
CHANNEL_OUT
3.27.9.3 4.1 UDT 325 - EM_DATA_R1 - Data structure for FB 325
UDT - Header
Name
Timeout
Polltime
Control_Global
Status_Global
Status
Alarm_Global
HB300 | SM-AIO | | en | 17-05
Declaration Data type
INPUT BYTE
IN_OUT UDT
INPUT ANY
INPUT ANY
Declaration Data type
INPUT TIME
INPUT TIME
INPUT BYTE
OUTPUT BYTE
OUTPUT BYTE
031-1PA00 - AI1x 3Ph 230/400V 1A > Use handling block
Description
n 0x01 = Data exchange via process data
Currently only the MODE = 1 is supported
n UDT for the measured values
UDT 325 - EM_DATA_R1 - Data structure for FB 325'
on page 333
Pointer to the input data
n With MODE = 0x01 exclusively data type BYTE and
length 16 are permitted.
Example: P#E100.0 BYTE 16 or P#DB10.DBX0.0
BYTE 16
Pointer to the output data
n With MODE = 0x01 exclusively data type BYTE and
length 16 are permitted.
Example: P#A100.0 BYTE 16 or P#DB10.DBX16.0
BYTE 16
Description
n Timeout for reading measured values
n Interval for the periodic reading
0: de-activated, 1: activated
n Bit 0: Periodic execution according to the Polltime (default)
n Bit 1: Immediate execution - bit is to be reset after the exe-
cution.
n Bit 6 ... 2: reserved
n Bit 7: Re-initialization of the block by the configuration is
sent again
Block status
n 0x00: Not processed
n 0x01: In process (BUSY)
n 0x02: Ready without error (DONE)
n 0x80: Error on processing (ERROR)
Corresponds to B3: Header byte 3 - Common status
n Bit 0: Frequency F_MAX exceeded
n Bit 1: Frequency F_MIN undershot
n Bit 2: Temperature T_MAX exceeded
n Bit 3: Voltage VRMS_MAX exceeded
n Bit 4: Voltage VRMS_MIN undershot
n Bit 5: Efficiency PF_MIN undershot
n Bit 6: Current IRMS_MAX exceeded
Bit 7: reserved
n
Ä 'Common status' on page 320
Analog Input
Ä Chapter 3.27.9.3 '4.1
333