YASKAWA VIPA System SLIO Manual page 323

VIPA System SLIO
3.27.7.2.3 Set Frame
Overview
Request
Byte Value
B0 0x30
B1 ?
B2 0x0?
B3 0x00
D00 ?
...
D11
Response
Byte Value
B0 0x30
B1 ...
B2 ...
B3 ...
D00 ...
...
D11
HB300 | SM-AIO | | en | 17-05
In the module you can combine some measurands to one data package (Frame), which
is transferred in one step
Description
n Bit 3 ... 0: Error code (not relevant)
n Bit 6 ... 4: 011 Telegram type 'Set Frame'
n Bit 7: 0 fix reserved
Ä 'FR-ID' on page 310 of the Frame to be set
n
n Length user data: 1 byte each measurand
DS-ID here fix 0
n
n Common status (not relevant)
n 1 byte each measurand regarding that the measured values do not exceed the total
length of 12 byte. Here, the format of the measured values is taken into account.
Ä Chapter 3.27.6 'Measurands' on page 316
Ä 'Data type' on page 310
Description
n Bit 3 ... 0: Ä 'Status communication' on page 319
n Bit 6 ... 4: 011 Telegram type 'Set Frame'
Bit 7: 0 fix reserved
n
n FR-ID of the Frame from the request
n Length of the user data from the request
n DS-ID here fix 0
n Ä 'Common status' on page 320
n User data from the request
031-1PA00 - AI1x 3Ph 230/400V 1A > Process data communication
Ä 'Frame' on page 310. With 'Set Frame' a Frame can be built.
Analog Input
323