Parameter Data - YASKAWA VIPA System SLIO Manual

VIPA System SLIO
3.23.2

Parameter data

Name Bytes
SUPR 1
CH0FN 1
CH1FN 1
CH2FN 1
CH3FN 1
SUPR Interference fre-
quency suppression
CHxFN Function number
channel x
HB300 | SM-AIO | | en | 17-05
DS - Record set for access via CPU, PROFIBUS and PROFINET
IX - Index for access via CANopen
SX - Subindex for access via EtherCAT with Index 3100h + EtherCAT-Slot
More can be found in the according manual of your bus coupler.
Function
Interference frequency suppression
Function number channel 0
Function number channel 1
Function number channel 2
Function number channel 3
Byte Bit 7 ... 0
0 n Bit 1, 0: Interference frequency suppression channel 0
n Bit 3, 2: Interference frequency suppression channel 1
n Bit 5, 4: Interference frequency suppression channel 2
n Bit 7, 6: Interference frequency suppression channel 3
–
–
–
e.g.: 10101010: all channels frequency suppression 50Hz
In the following there are the measuring ranges with corresponding function number
listed, which were supported by the analog module. With FFh the corresponding channel
is deactivated. The formulas listed here allow you to transform an evaluated measuring
value (digital value) to a value assigned to the measuring range (analog value) and vice
versa.
031-1CD45 - AI 4x16Bit 0(4)...20mA > Parameter data
Default
00h
31h
31h
31h
31h
00: deactivated
01: 60Hz
10: 50Hz
Analog Input
DS IX SX
01h 3100h 01h
80h 3101h 02h
81h 3102h 03h
82h 3103h 04h
83h 3104h 05h
261