031-1Cb70 - Ai 2X16Bit ±10V - YASKAWA VIPA System SLIO Manual

Analog Input
031-1CB70 - AI 2x16Bit ±10V
3.19 031-1CB70 - AI 2x16Bit ±10V
Properties
Structure
Status indication
212
The electronic module has 2 inputs with parameterizable functions. The channels of the
module are electrically isolated from the backplane bus. In addition, the channels are iso-
lated to the DC 24V power supply by means of DC/DC converter.
n 2 analog inputs
n Suited for sensors with ±10V,
0 ... 10V
Interrupt and diagnostics function
n
n Interference frequency suppression parameterizable (50/60Hz)
n 16bit resolution
1 Locking lever terminal module
2 Labeling strip
3 Backplane bus
4 LED status indication
5 DC 24V power section supply
6 Electronic module
7 Terminal module
8 Locking lever electronic module
9 Terminal
RUN MF
green red
● ○
● ●
○ ●
○ ○
X B
● ○
on: ● | off: ○ | blinks with 2Hz: B | not relevant: X
AI x Description
red
Bus communication is OK
X
Module status is OK
Bus communication is OK
X
Module status reports an error
Bus communication is not possible
X
Module status reports an error
X Error at bus power supply
Error in configuration
X
- LEDs' on page 31
Error channel x
●
n Signal leaves measuring range
n Error in parameterization
VIPA System SLIO
Ä Chapter 2.8 'Trouble shooting
HB300 | SM-AIO | | en | 17-05