Section 3
3.1
General information regarding the Machine Control Panel
•
The following diagram shows the layout of the 802D machine control panel.
•
The layout is independent of the MCP types.
•
The CNC functionality is independent of the MCP types.
•
The source of the inputs of the MCP differs between MCP types.
•
The destination of the customer LED's differs between MCP types.
For ease of signal (pushbutton) testing each key and lamp is assigned in the dia-
gram a mnemonic address:
NC START key is given mnemonic
Example:
+X
Etc.
This mnemonic is used to trace the signal flow of the keys and lamps.
Reset
Cycle Stop
SINUMERIK 802D sl Operating and Service Training Manual
Hardware interface
#27
key is given mnemonic
#17
[VAR]
Jog
Ref Point
Auto
Single Block
MDA
Spindle Left
Spindle Stop
Spindle Right
Rapid
Page 4
Notes
C8
C8