Machine Space (With "Collision Avoidance" Option); Editing The Simulation Display; Deleting The Tool Path - Siemens SINUMERIK 840D sl Operating Manual

Changing the display
You can enlarge, reduce, pan, and rotate the simulation graphic and the segment.
7.6.7

Machine space (with "collision avoidance" option)

Displaying the machine space view
Changing the display
You have the capability of enlarging, reducing, moving, and rotating the simulation graphic
and to change the section.
7.7

Editing the simulation display

7.7.1

Deleting the tool path

The path display follows the programmed tool path of the selected program. The path is
continuously updated as a function of the tool movement.
Grinding
Operating Manual, 05/2017, A5E40869190
3. Press the "From the front" softkey if you wish to view from the front.
- OR -
Press the "From the rear" softkey if you wish to view from the rear.
- OR -
Press the "From the left" softkey if you wish to view from the left.
- OR -
Press the "From the right" softkey if you wish to view from the right.
1. Simultaneous recording or the simulation is started.
4. Press the "Other views" and "Machine space" softkeys.
During simultaneous recording, an active machine model is displayed.
Simulating machining
7.7 Editing the simulation display
187