Chapter 3 Ausm Card Management; Managing Cli Sessions; Table 3-1 Session Management Commands - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Ausm software
Hide thumbs Also See for MGX 8850 PXM1E:
Table of Contents

Advertisement

AUSM Card Management
This chapter provides procedures for managing AUSM-8T1/Band AUSM-8E1 cards after the initial card
setup and provisioning.
Initial card setup is described in the Cisco MGX 8850 (PXM1E) and MGX 883Cisco MGX 8850
Note
(PXM1E) and MGX 8830 Software Configuration Guide, Release 3. The provisioning of AUSM cards is
described in
This chapter describes the following AUSM management procedures:

Managing CLI Sessions

Basic session initialization and management is described in the Cisco MGX 8850 (PXM1E) and MGX
883Cisco MGX 8850 (PXM1E) and MGX 8830 Software Configuration Guide, Release 3.
and describes the session management commands supported on the AUSM cards. For more information
on these commands, see
Table 3-1
Command
?
aimhelp
Help
clear
clrscrn
cls
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 2, "Provisioning Communications Links."
Managing CLI Sessions
Managing Cards
Managing Lines
Managing Ports
Managing IMA Groups
Managing Resource Partitions
Managing Connections
Chapter 4, "AUSM Command Reference."
Session Management Commands
Description
Displays the available commands.
Clears the session screen.
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
C H A P T E R
3
Table 3-1
lists
3-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgx 8830

Table of Contents