Dspimagrps - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

dspimagrps

Display IMA Groups
Use the dspimagrps command to list the configured IMA groups on the current AUSM card.
Syntax
dspimagrps
Syntax Description
None
Related Commands
addimagrp, addlns2imagrp, cnfimagrp, delimagrp, dellnsfmimagrp, dspimagrp
Attributes
Log: No
Example
Display all IMA groups on the current card.
PXM1E_SJ.1.1.AUSMB8.a > dspimagrps
List of IMA groups:
===================
ImaGrp PortType Conf
------ -------- ----- -----
1.1
1.2
NextPortNumAvailable:
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Active
Avail
rate rate
NNI 14364 14364
NNI 14364 0
5
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
Lines configured Lines present
--------------- --------------- --------- ----------
1.2.3.4 1.2.3.4
5.6.7.8
dspimagrps
Tol Diff Port State
Delay(ms)
275 Active
275 Sig. Failure
4-145