Clralm - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

clralm

clralm
Clear Alarm
Use the clralm command to clear any active alarms on a specific line of the current AUSM card. The
alarms will not clear if the alarm cause is still present.
Syntax
clralm -ds1 <line>
Syntax Description
line
Related Commands
clralms, dspalm, dspalms
Attributes
Log: No
Example
Clear the active alarms for line 2 on the current AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > clralm -ds1 2
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-32
Line number for the line you want to display the alarm configuration. Use dsplns
to view the available lines.
State: Any Privilege: Group 5
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002