Install Cable Management On A Chassis - Cisco Nexus 9808 NX-OS Hardware Installation Manual

Unpack and Install the Chassis

Install Cable Management on a Chassis

Before you begin
The chassis must be installed and secured to the rack.
Required tools and equipment:
• Phillips screwdriver with a torque capability (customer supplied)
• Cable management brackets (N9K-C9808-CM-KIT).
Note
Procedure
Step 1
Position one of the cable management brackets on the vertical mounting bracket so that the screw holes are
aligned.
Figure 16: Cable Management Brackets
Step 2
Secure the left and right cable management brackets to the chassis vertical mounting brackets with M4 x
18-mm screws, flat-head Phillips screws (use all screws provided in the kit). Insert one screw at the top and
The cable management assembly is shipped with the chassis.
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Install Cable Management on a Chassis
31