Chapter 3
AUSM Card Management
Managing Connections
PXM1E_SJ.1.4.AUSMB8.a > tstcon 1.100.100
PXM1E_SJ.1.4.AUSMB8.a >
TestCon in progress.
TestCon Passed.
Testing with tstdelay
The tstdelay command checks to see if the switch can communicate with both ends of the connection,
and it returns a measurement of the delay across the connection. To test an AUSM connection with the
tstdelay command, enter the command as follows:
PXM1E_SJ.1.4.AUSMB8.a > tstdelay <port_num.vpi.vci>
Enter the connection port number, VPI, and VCI with the command. You can view the port, VPI, and
VCI numbers in the dspcons display. The following is an example of a tstdelay test:
PXM1E_SJ.1.4.AUSMB8.a > tstdelay 1.100.100
PXM1E_SJ.1.4.AUSMB8.a >
TestDelay in progress.
TestDelay Passed with 1 ms.
PXM1E_SJ.1.4.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
3-17
Release 3, Part Number 78-14254-01 Rev. A0, October 2002