clraimgrpcnt
clraimgrpcnt
Clear AIM Group Counter
Use the clraimgrpcnt command to clear the failure count for a specific IMA group on the current AUSM
card.
Syntax
clraimgrpcnt <group_num>
Syntax Description
group_num
Related Commands
clraimlncnt, dspaimgrp, dspaimgrpcnt, dspaimgrps, dspaimlncnt, dspimainfo
Attributes
Log: No
Example
Clear the failure count for IMA group 1 on the current card.
PXM1E_SJ.1.1.AUSMB8.a > clraimgrpcnt 1
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-30
Enter the number for the IMA group you want to modify. Use the dspimagrps
command to display the configured IMA groups.
State: Active
Privilege: Group 1
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002