Table of Contents
Advertisement
addrscprtn
Related Commands
cnfrscprtn, delrscprtn, dsprscprtn
Attributes
Log: Yes
Example
The following example adds a resource partition to a port after the default partition was deleted.
PXM1E_SJ.1.1.AUSMB8.a > addrscprtn 1 2 100 100 0 255 35 65535 1 1000 1000 2
PXM1E_SJ.1.1.AUSMB8.a >
Tip
Several specifications reserve VCI values in the range of 0 through 35. If you are not familiar with these
specifications and want to avoid potential conflicts, set the lower VCI value to 35.
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-22
State: Active
Privilege: Group 1
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Advertisement
Table of Contents
