Cnfimatst - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

cnfimatst

Configure IMA Test
Use the cnfimatst command to configure the IMA self test feature.
Syntax
cnfimatst <group_num> <test_link_num> <test_pattern> <test_proc_status>
Syntax Description
group_num
test_link_num
test_pattern
test_proc_status
Related Commands
clrimatst, dspimagrp, dspimagrps, dspimatst
Attributes
Log: No
Example
Configure the IMA test feature for IMA group 1, line 1 to use test pattern 5.
PXM1E_SJ.1.1.AUSMB8.a > cnfimatst 1 1 5 2
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the number for the IMA group you want to configure. Use the
dspimagrps command to display the configured IMA groups.
Enter the number for the line you want to test. Use the dspimagrps command
to display the lines assigned to an IMA group.
Enter a value in the range of 1 to 255 to select a test pattern.
Enter the value 2.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
cnfimatst
4-69