Dspports - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspports

dspports
Display Ports
Use the dspports command to view a summary of all ports on the current card.
Syntax
dspports
Syntax Description
None
Related Commands
addport, delport, dspport
Attributes
Log: No
Example
Display all ports on the current AUSM.
PXM1E_SJ.1.1.AUSMB8.a > dspports
List of ATM ports:
==================
Port PortType Line# Portenable
---- -------- ----- ----------
1.5
1.6
1.7
1.8
List of IMA groups:
===================
ImaGrp PortType Conf
------ -------- ----- -----
1.1
NextPortNumAvailable:
ImaGrp
------
1.1
Syntax : dspports
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-166
State: Any
NNI 5 UP
NNI 6 UP
UNI 7 UP
UNI 8 UP
Avail Lines configured
rate rate
---------------
NNI 14364 14364 1.2.3.4
2
Sync State
----------
Far-End Permanent
Privilege: Any User
Speed PortState
----- ---------
3622 Line alarm
3622 Line alarm
3622 Line alarm
3622 Line alarm
Lines present
--------------- --------- ----------
1.2.3.4
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 4 AUSM Command Reference
Tol Diff Port State
Delay(ms)
275 Active