Dspportq - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

dspportq

Display Port Queue Information
Use the dspportq command to view queue information for a specified egress queue on an ATM port or
IMA group.
Syntax
dspportq <port number> <egress queue number>
Syntax Description
port number
egress queue number
Related Commands
cnfportq, dspportqs, dspports
Attributes
Log: No
Example
Display queue information for egress queue 1 on port 1.
PXM1E_SJ.1.1.AUSMB8.a > dspportq 1 1
ServicePortNum:
QueueNumber:
PortBinState:
ServiceSequence:
QueueDepth(cells):
CLPThresholdHigh(cells):
CLPThresholdLow(cells):
EFCIThreshold(cells):
QueueAlgorithm:
MaxBandwidthIncrement:
MinBandwidthIncrement:
QCLPState:
QFullDiscardedCells:
CLPSetDiscardedCells:
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number you want to display. To view a list of configured ports,
enter the dspports command.
Enter the egress queue number you want to display. To view a list of egress
queues, enter the dspportqs command.
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Any User
1
1
Enabled
1
200
180
160
160
3
0
0
Low
0
0
dspportq
4-163