Addln - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

addln

addln
Add Line
Use the addln command to activate a line on an AUSM card.
Syntax
addln <line_num>
Syntax Description
line_num
Related Commands
cnfln, delln, dspln, dsplns
Attributes
Log: Yes
Example
Bring up line 8 on an AUSM-8T1/B card.
PXM1E_SJ.1.21.AUSMB8.a > addln 8
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-16
Enter the line number you want to activate. For a list of the lines available on the
current card, enter the dsplns command.
State: Active Privilege: Group 1
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002