Runslftstno - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

runslftstno

runslftstno
Run Self Test Number
Use the runslftstno command to execute one of the self tests on the AUSM card. To display a list of the
self tests, enter this command without parameters or enter the dspslftsttbl command.
Syntax
runslftstno <test_no>
Syntax Description
test_no
Caution Some tests reset the card or interrupt connections. These tests are identified in the dspslftsttbl command
display.
Related Commands
clrslftst, cnfslftst, dspslftst, dspslftsttbl
Attributes
Log: No
Example
Run self test number 9.
PXM1E_SJ.1.21.AUSMB8.a > runslftstno 9
Test Number 9 Result: PASS
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-184
Enter the number of the test you want to run.
State: Any Privilege: Any User
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002