Table of Contents
Advertisement
dspcons
-ct
-master
-pqn
-admin
-alarm
Related Commands
addcon, cnfcon, delcon, dncon, dspcon, rrtcon, tstcon, upcon
Attributes
Log: No
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-136
Connection type. Use this option to limit the display to connections that use a
specific channel type. To select the channel type, select one of the following
types:
Virtual Path Connection = VPC
•
Virtual Channel Connection = VCC
•
Mastership. This option allows you to limit the display to connections for which
the local endpoint is either a master endpoint or a slave endpoint. To use this
option, enter either -master master or -master slave.
Egress queue select. Use this option to select connections based on the egress
queues they are using. Valid queue numbers are 1 through 16.
Administrative status. Use this option to limit the display to those connections
that either are administratively up or to those that are administratively down. To
use this option, enter either -admin up or -admin down.
Alarm type. Use this option to limit the display to connections that meet a
specific alarm condition. To select the alarm condition, enter the option with
one of the following keywords:
OK
•
PORT-ALARM
•
•
CTRLR-ABIT
•
E-AIS
•
RDI
I-AIS
•
•
RDI
State: Any
Privilege: Any User
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Advertisement
Table of Contents
