Table of Contents
Advertisement
Chapter 4
AUSM Command Reference
copychans
Copy Channels
Use the copychans command to copy a channel configuration onto one or more channels. This command
enables you to create and configure multiple channels from a specified "template" channel.
Syntax
copychans <template chan #> <start chan #> <start vci #> <# of chans> [<start remote VPI>
<start remote VCI>]
Syntax Description
template chan #
start chan #
start vci #
# of chans
start remote VPI
start remote VCI
Related Commands
addcon, delchan, delchans
Attributes
Log: Yes
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Specifies the channel number you are using as a template. To view the channels
on the current card, use the dspcons or dspchans commands.
Starting channel number. Use the dspcons or dspchans commands to see which
channels are already being used.
Starting VCI number. You can use the dspcons or dspchans commands to see
which VCIs are already being used.
Specify the number of channels you want to create using the template channel
configuration.
This option allows you to specify a starting remote virtual path identifier (VPI)
for the connections you are creating.
This option allows you to specify a starting remote virtual channel identifier
(VCI) for the connections you are creating.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
copychans
4-91
Advertisement
Table of Contents
