Tstdelay - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

tstdelay

Test Delay
Use the tstdelay command to test a connection. This command displays the test result and the time it
took to test the connection.
Syntax
tstdelay <port_num.vpi.vci | channel_num>
Syntax Description
port_num
vpi
vci
channel_num
Related Commands
addcon, cnfcon, delcon, dncon, dspcon, dspcons, rrtcon, tstcon, upcon
Attributes
Log: No
Example
Test connection 16.
PXM1E_SJ.1.4.AUSMB8.a > tstdelay 16
PXM1E_SJ.1.4.AUSMB8.a >
TestDelay in progress.
TestDelay Passed with 1 ms.
PXM1E_SJ.1.4.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number for the connection you want to test. To display a list of
configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
Enter the channel number of the connection you want to test. The dspcons
command displays connection channel numbers in the LCN column.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 4
tstdelay
4-189