Tstcon - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

tstcon

Test Connection
Use the tstcon command to test the integrity of a connection you have created with the addcon
command. The tstcon command sends a single collection of supervisory cells from the local to the
remote end and displays a pass or fail message.
Syntax
tstcon <port_num.vpi.vci | channel_num>
Syntax Description
port_num
vpi
vci
channel_num
Related Commands
addcon, cnfcon, delcon, dncon, dspcon, dspcons, rrtcon, tstdelay, upcon
Attributes
Log: No
Example
Test connection 100/100 on port 1.
PXM1E_SJ.1.4.AUSMB8.a > tstcon 1.100.100
PXM1E_SJ.1.4.AUSMB8.a >
TestCon in progress.
TestCon Passed.
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number for the connection you want to test. To display a list of
configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
Enter the channel number of the connection you want to test. The dspcons
command displays connection channel numbers in the LCN column.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 4
tstcon
4-187