Table of Contents
Advertisement
Related Documentation
Cisco MGX 8830 Multiservice Switch Release 3
The product documentation for installing and operating the Cisco MGX 8830 Multiservice Switch
Release 3 is listed in
Table 7
Cisco MGX 8830 Multiservice Switch Release 3 Documentation
Title
Cisco MGX 8830 Hardware Installation Guide, Release 3
DOC-7814547=
Cisco MGX 8850 (PXM1E) and MGX 8830 Software
Configuration Guide, Release 3
DOC-7814248=
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E), and
MGX 8950 Command Reference, Release 3
DOC-7814789=
Cisco SNMP Reference for MGX 8850 (PXM45 and
PXM1E), MGX 8950, and MGX 8830, Release 3
DOC-7814747=
Cisco AUSM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and MGX
8830, Release 3
DOC-7814254=
Cisco CESM Software Configuration Guide and
Command Reference for MGX 8850 (PXM1E) and
MGX 8830, Release 3
DOC-7814256=
Cisco Frame Relay Software Configuration Guide and
Command Reference for MGX Switches (PXM1E)
DOC-7814255=
Cisco VISM Installation and Configuration Guide,
Release 3.0
OL-2521-01 (online only)
Regulatory Compliance and Safety Information for the
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E), and
MGX 8950 Switches
DOC-7814790=
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
xx
Table
7.
Description
Describes how to install the Cisco MGX 8830 edge switch. This
documentation explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling. The
Cisco MGX 8830 switch uses a PXM1E controller card and
provides PNNI support for narrowband service modules.
Describes how to configure the Cisco MGX 8850 (PXM1E) and
the Cisco MGX 8830 switches with PXM1E controller cards to
operate as ATM edge switches. This guide also provides some
operation and maintenance procedures.
Describes the PXM commands that are available on the CLI of
the Cisco MGX 8830, Cisco MGX 8850, and Cisco MGX 8950
switches.
Provides information on all supported MIB objects, support
restrictions, and traps for AXSM, AXSM-E, SRM-3T3, SRME,
FRSM12, PXM45, PXM1E, RPM-PR, and RPM-XF.
Provides software configuration procedures for provisioning
connections and managing the AUSM cards supported in this
release. Also provides command descriptions for all AUSM
commands.
Provides software configuration procedures for provisioning
connections and managing the CESM cards supported in this
release. Also provides command descriptions for all CESM
commands.
Provides software configuration procedures for provisioning
connections and managing the FRSM cards supported in this
release. Also provides command descriptions for all FRSM
commands.
Describes how to install and configure VISM in the Cisco
MGX 8850 (PXM1), Cisco MGX 8250, and Cisco MGX 8230
switches. Also provides troubleshooting, maintenance, cable and
connector specifications, and Cisco CLI command configuration
information.
Provides regulatory compliance, product warnings, and safety
recommendations for the Cisco MGX 8830, Cisco MGX 8850
(PXM45 and PXM1E), and Cisco MGX 8950 switches.
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
About This Book
Advertisement
Table of Contents
