Dsprscprtn - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

dsprscprtn

Display Resource Partition
Use the dsprscprtn command to display the configuration of a resource partition that is assigned to a
specific ATM port or IMA group.
Syntax
dsprscprtn <port number>
Syntax Description
port number
Related Commands
addrscprtn, cnfrscprtn, delrscprtn
Attributes
Log: Yes
Example
Display resource partition configuration information for port 1 on the current AUSM card.
PXM1E_SJ.1.1.AUSMB8.a > dsprscprtn 1
Port
---- ----- --------
1
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Specify the port number for the resource partition you want to view. The
dspports command lists all configured ports.
State: Active
User NumOfLcn VPI
Low/High
--------
PNNI 1000 0 / 255 1
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
VPID VCI
Low/High Low/High
--------- ------------
/ 1000 0 / 65535
dsprscprtn
IngrBW EgrBW CtrlrId
------ ----- -------
100 100 2
4-167