delrscprtn
delrscprtn
Delete Resource Partition
Use the delrscprtn command to delete a resource partition configuration.
Syntax
delrscprtn <port_num> <cntrlr_type> <cntrlr_id>
Syntax Description
port_num
cntrlr_type
cntrlr_id
Related Commands
addrscprtn, cnfrscprtn, dsprscprtn
Attributes
Log: Yes
Example
The following example deletes a PNNI resource partition from port 1.
PXM1E_SJ.1.1.AUSMB8.a > delrscprtn 1 2 2
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-104
Port number from which to delete the partition. Use the dspports command to
view the available ports.
Controller for this partition. Enter 2, as the PNNI controller is the only
controller supported in this release.
•
PAR = 1
•
PNNI = 2
•
MPLS = 3
Enter the controller ID assigned to the partition you are deleting. To display the
controller ID, use the dsprscprtn command.
State: Active
Privilege: Group 1
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002