Table of Contents
Advertisement
Chapter 4
AUSM Command Reference
-scrp
-ccdv
-cte
-dis
-pcr01
-scr
-cbs
-maxcost
-rtngpri
-type
-rpcr
-rscr
-rmcr
-rcbs
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Sustainable Cell Rate (SCR) policing method:
•
CLP[0] = 1
CLP[0+1] = 2
•
•
No SCR policing = 3
Note
This option only applies to the following service class types (-st option):
CBR (1), nrtVBR (2), ABR (3), UBR (4), and rtVBR (5).
Enter the Cell Delay Variation Tolerance (CDVT[0+1]). The range is 1 to
250000 microseconds.
•
Cell Loss Priority (CLP) tagging feature. Enter 1 to disable this feature, or
enter 2 to enable CLP tagging.
This option only applies to the following service class types (-st option):
Note
CBR (1), nrtVBR (2), ABR (3), UBR (4), and rtVBR (5).
Enter the cell discard method:
CLP hysteresis = 1
•
Frame based = 2
•
Select the ingress UPC PCR[0+1]:
•
Full ATM port rate (T1-3622, E1-4528, clearE1-4830) = 10
•
IMA group rate = ATM port rate x #links
Select the ingress UPC Committed Information Rate (CIR):
Full ATM port rate (T1-3622, E1-4528, clearE1-4830) = 10
•
IMA group rate = ATM port rate x #links
•
Enter the maximum burst size. The range is 1 to 5000 cells.
Maximum end-to-end cost for the connection. Range is 1 to 2,147,483,647.
Default setting is 2147483647.
Routing priority for this connection. Range is 1 to 15. Default setting is 8.
Trunk restriction option. To restrict the connection routing to terrestrial trunks,
enter -type 2. To restrict the connection routing to satellite trunks, enter -type
3. To enable connection routing without trunk restrictions, enter -type 1.
Default setting routes connections with no restrictions.
Remote peak cell rate in cells per second (cps):
•
Full ATM port rate (T1-3622, E1-4528, clearE1-4830) = 10
•
IMA group rate = ATM port rate x #links
Remote sustainable cell rate:
Full ATM port rate (T1-3622, E1-4528, clearE1-4830) = 10
•
IMA group rate = ATM port rate x #links
•
Remote minimum cell rate:
•
Full ATM port rate (T1-3622, E1-4528, clearE1-4830) = 10
•
IMA group rate = ATM port rate x #links
Remote maximum burst size. Range is 1 to 5,000,000.
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
addspvc
4-25
Advertisement
Table of Contents
