Table of Contents
Advertisement
delchans
delchans
Use the delchans command to delete a range of AUSM connections by specifying the channel numbers.
Channel numbers are assigned by the switch as each connection is defined with the addcon command.
You can view connection channel numbers in the LCN column of the dspcons command.
Syntax
delchans <start chan #> <# of chans>
Syntax Description
start chan #
# of chans
Related Commands
addcon, cnfchan, cnfcon, dspcons, dspchans
Attributes
Log: Yes
Example
Delete channels 16 through 17 on the current card.
PXM1E_SJ.1.4.AUSMB8.a > delchans 16 2
PXM1E_SJ.1.4.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-96
Enter a Logical Connection Number (LCN) as it appears in the dspcons
command display.
Number of consecutive channels to delete.
State: Active
Privilege: Group 1
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Advertisement
Table of Contents
