Upcon - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

upcon

upcon
Up Connection
Use the upcon command to bring up a connection.
Note This command operates only on master endpoints.
Syntax
upcon <port_num.vpi.vci | channel_num>
Syntax Description
port_num
vpi
vci
channel_num
Related Commands
addcon, delcon, dncon, dspcon, dspcons
Attributes
Log: Yes
Example
Bring up the connection on port 2, VPI/VCI 100/100.
PXM1E_SJ.1.4.AUSMB8.a > upcon 2.100.100
PXM1E_SJ.1.4.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-190
Enter the port number for the connection you want to modify. To display a list
of configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
Enter the channel number of the connection you want to modify. The dspcons
command displays connection channel numbers in the LCN column.
State: Active Privilege: Group 1
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002