Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference page 52

General AUSM Provisioning Procedures
Step 4 Verify the addition of the slave side of the SPVC connection by entering the following command, which
causes all information for the SPVCs to be displayed:
PXM1E_SJ.1.4.AUSMB8.a > dspcons
LCN
---- ---- --- ----- -------
0016 001
Number of channels:
ChanNumNextAvailable
Local VpId NextAvailable :
PXM1E_SJ.1.4.AUSMB8.a >
Step 5 If you add the master side of the SPVC at a later date, you can display the slave connection ID with the
dspcon command as follows:
PXM1E_SJ.1.4.AUSMB8.a > dspcon <port_num> <vpi> <vci>
The complete slave ID must be entered at the master endpoint in the format LocalNSAP.VPI.VCI. These
values correspond to dspcon parameters shown in this example:
PXM1E_SJ.1.4.AUSMB8.a > dspcon 1 100 100
-------------------------------------------
ChanNum:
AdmnState: Up
---------- ---------- ---------- ----------
PORT-ALARM CTRLR-ABIT E-AIS/RDI
---------- ---------- ---------- ----------
YES
-------------------------------------------
ChanNum:
RowStatus:
ConnAdminStatus:
ConnectionType:
ServiceType:
ChanSvcFlag:
PortNum:
VPI:
VCI (For VCC):
Local VPId(for VPC):
EgressQNum:
IngressQDepth(cells):
IngressDiscardOption:
IngressFrameDiscardThreshold
IngressQCLPHigh(cells):
IngressQCLPLow(cells):
QCLPState:
IngressEfciThreshold(cells):
UPCEnable:
PeakCellRate[0+1](cells/sec):
CellDelayVariation[0+1]:
PeakCellRate[0](cells/sec):
CellDelayVariation[0]:
SustainedCellRate(cells/sec):
MaximumBurstSize(cells):
SCRPolicing:
CLPTagEnable:
FrameGCRAEnable:
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
2-20
Port VPI VCI Class
100 00100 CBR1
1
:
16 RowStatus: Add
ChanState: Failed
YES NO
Type M/S EgrQ Admin Alarm
----- --- ---- ----- -----
VCC S 1 Up PORT-ALARM
17
1
I-AIS/RDI
NO
16
Add
Up
VCC
CBR1
PNNI
1
100
100
0
1
1000
CLP hysterisis
1000
900
800
LOW
1000
Enabled
3591
10000 (micro secs)
3591
250000 (micro secs)
10
1024
CLP[0]
Enabled
Disable
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 2 Provisioning Communications Links